Probes (spring-loaded sensors)

You are here: Products

Probes

Probes are usually employed when displacement of moving or frequently changing targets shall be measured. It is practical or possible to fix the core of a standard sensor to the target. The probe tip is slightly pressed against the target, with the probe rod being guided and spring-loaded.

We offer a range of standard probes and extremely rugged types for harsh industrial applications or even pressure-resistant (<300 bar) versions.

Picture	Type and description	Data sheet
	InduSmart DTL probes --- NEW, also DC/DC versions available --- updated datasheet under prep. Spring-loaded LVDT probe Range 50 … 200 mm External spring for compact body Outstanding linearity (up to 0,1%) AC/AC models, optional 80 mV/V output DC/DC models with 2…10VDC, 4…20mA or PWM output	DTL 68 kB 04.2010
	WT / WTA inductive half-bridge (LVIT) stroke range 2 … 100 mm internal spring WT: 12 mm body diameter WTA: 12 mm body diameter with 8 mm shank WT special model with 150 mm range	WT(A) 73 kB 04.2010
	WTG / WTH inductive half-bridge (LVIT) stroke range 2 … 100 mm calibrated to 80 mV/V output internal spring WTG: 12 mm body diameter WTH: 12 mm body diameter with 8 mm shank WTG special model with 150 mm range	WTG(H) 65 kB 04.2010
	DTC inductive full-bridge (LVDT) stroke range 20 … 100 mm rugged probe for harsh industrial applications 25mm body diameter calibrated to 80 mV/V output enclosed spring	DTC 26 kB 08.2000
	DT…E inductive full-bridge (LVDT) stroke range 25 … 70 mm 20 mm body diameter pressure resistant up to 350 bar open spring		In prep.
	WPT eddy-current sensor outstanding body-to-stroke ratio half-bridge sensor with sleeve core stroke range 60 … 1000 mm pressure resistant up to 320 bar sensor body in pressurized area 4-hole flange open spring		In prep.
	Technical info on WPx series	61 kB 04.1998

Further information - also on older sensor types is available in the protected download area for registered users.



Remember me:
Registration