Electronics / Measuring amplifiers

MBI 46.51. field housing

• Universal CF amplifier for LVDT / LVIT
• Supply voltage: +24 VDC (10...36 VDC)
• Carrier frequency: 5 kHz (or 10kHz / 20kHz)
• Output signal: +0...10 V and 4 ... 20 mA
• Cast housing IP 66 with cable gland
• Wide range of adjustments
• For harsh industrial environments

MBI 46.31. field housing

• Supply voltage: +24 VDC / +230 VAC
• Carrier frequency: 5 kHz (others optional)
• Output signal: +10 V / 4 ... 20 mA
• Type: Cast housing with cable gland

MBI 46.31. euroboard

• Supply: +24 VDC / +230 VAC
• Frequency: 5 kHz
• Output signal: +10 V / 4 ... 20 mA
• Type: EU card / EU card, front panel / EU card, terminal block

MBI 46.32

• Supply: ±15 VDC oder 24VDC
• Carrier frequency: 5 kHz / others optional
• Output signal: ±10 V or 4...20mA
• Design: Plastic casing, top-hat rail

MBI 46.32

• Supply: +24 VDC
• Frequency: 5 kHz
• Output signal: 10 V
• Casing: Top-hat rail plastic casing

MBI 46.33. field housing

• Supply voltage: ±15 V or +24 V
• Carrier frequency: 5 kHz (others optional)
• Output signal: ±10 V or 4...20 mA
• Construction: Die-cast housing IP65

MBI 46.41

• Supply: 85 ... 250 VAC oder 11 ... 36 VDC
• Frequency: 5 kHz
• Input: 20 mA or 10 VDC
• Output signal: ±10 V
• Up to IP 65 protection (in casing)

MBI 50.25 field housing

• Supply: 230 VAC
• Carrier frequency: 10 kHz
• Output signal: ±10 V or 4...20mA
• Design: Die-cast field housing

MBI 50.25 euroboard

• Supply: ±15 VDC or 230VAC
• Carrier frequency: 10 kHz
• Output signal: ±10 V or 4 ...20mA
• Design: Euroboard PCB with front panel

MBI 50.43

• Supply: ±15 VDC
• Frequency: 10 kHz
• Output signal: ±10 V
• Design: Eurocard PCB

Q.bloxx A106

• Supply: +10 ... 30 VDC
• Frequency: DC / 600 Hz/ 4.8 kHz
• Output: ±10 V
• Design: Top-hat rail

Calibration box MVK

• Different sensitivity ranges selectable
• Robust aluminium housing with selector switches
• Electrical connection via 9-pin D-Sub plug

Converter MNHµCON

• Supply: +24 VDC or -24 VDC
• Design: Field housing 80 x 75 x 57 mm
• Output signal: 0 ... 10 VDC or 0(4) ... 20mA
• Dynamic range: 0 ... 10 kHz (-3 dB)

RD-Module

• Compact top-hat rail module
• Measuring range 1 ... 35mm
• Supply voltage 18...30 VDC
• Output signal 4...20 mA

LS-Module

• Measuring range 10...100mV/mm/s at 10 ... 1000Hz
• Supply voltage 18...30 VDC
• Output signal 4...20 mA
• Decoupled raw signal output for verification
• Integrated sensor / self-monitoring

WS-Module

• Peak value evaluation (0-P/P-P)
• Measuring range -4...-20mV / 1 ... 1000µm
• Supply voltage 18...30 VDC
• Output signal 4...20 mA

Smax-Modul (SP) Wellenschwing. 2-Achsen

• Messumformer zur vektoriellen Auswertung von 2-achsigen Wellenschwingungen mittels Wirbelstromsensoren
• kompaktes Rastschienenmodul
• Messbereich 1 ... 1000 µm
• Frequenzbereich 10 ... 1000 Hz
• Versorgungsspannung 18...30 VDC
• Ausgangsignal RSM/Sp-Sp 4...20 mA
• Rohsignalausgang zur Überprüfung
• Alarmfunktion obere/untere Schwellwerte

MBI 46.12 small module

• Supply: +24 VDC
• Frequency: 5 kHz
• Output signal: +10 V
• Design: Small casing / Clamping block

MBI 46.13 cable module

• Supply: +24 VDC
• Frequency: 5 kHz
• Output signal: +10V
• Casing: Small casing