MBI 46.41. display amplifier


Display	5-digit, 14 mm high red LED
Sensor supply	24 VDC, ±5 %, regulated, max. 50 mA
Measuring rate	20 measurements/second, A/D converter 16 bit resolution
Response times	200 ms for display of 99 % of the final value, max. 700 ms (lengthens with increase of digital filtering).
Interference signal suppression NMR	> 60 dB at 50/60Hz ±1 % (can be increased by digital filtering)
Common mode rejection CMR	> 100 dB, DC up to 120 Hz
Protection (DIN 40050)	Jet-proof and dust-tight from the front according to IP 65
Casing	Dark red, shockproof plastic housing. The electronic insert can be pulled out to the rear. One unit can be inserted. The plug-in cards can be installed very easily. Mounting via mounting frame with clamping screws
Dimensions	W 97 mm x H 50 mm x D 104 mm, Panel cut-out according to DIN: 92 mm x 45 mm
Electrical connection	fixed terminal blocks
Relative humidity	max. 85%. rH, non-condensing
Ambient temperature	Operation: 0 ... +50 °C With all 3 cards fitted: 0 ... +45 °C Storage: -40 ... +60 °C
Weight	approx. 300 g (without plug-in options)
Scope of delivery	Unit, fixing material, seal, operating instructions