Search
Search

Converter MNHµCON

Digital / processor controlled eddy current converter for operation of proximity sensors / eddy current sensors
  • Characteristic curve correction and temperature compensation via software
  • Thus extended measuring range of the MNH sensors
  • Robust IP 65 field housing
  • Small Lemo socket for sensor
  • Preset for MNH sensors

Important features

  • Supply: +24 VDC or -24 VDC
  • Design: Field housing 80 x 75 x 57 mm
  • Output signal: 0  ... 10 VDC or 0(4) ... 20mA
  • Dynamic range: 0 ... 10 kHz (-3 dB)

Technical data

. .
   
Supply +20 ... +30 VDC, reverse-voltage protected
max. power supply. 60mA (voltage output)
Suitable sensors MNH and similar eddy current sensors with operating frequency of 1 MHz
Linearity typically 1% (at 150% of nominal measurement range),
with individual linearization < 1%
Dynamic range 0 ... 10 kHz (-3 dB)
Output 0(4) ... 20 mA, load < 500 Ω or
0(2) ... 10 VDC, load > 10 kΩ
Selection via internal jumper

Operation and setting


   
Button Zero, sensitivity and threshold switch (teach-in), reset
LEDs Threshold switch status indicator
Configuration software Additional linearization and temperature compensation

Threshold switch

   
Upper value Adjusting range: 0 ... 100 % v. MB.
Lower value Adjusting range: 0 ... 100 % v. MB.
Outlets Hi-Level (based on +24 VDC), max. 10 mA

Mechanicals

.
   
Housing Cast aluminum housing for screw mounting to ground
Dimensions L x W x H 80 mm x 75 mm x 57 mm
Hole pattern see dimensional drawing
Weight 0,1 kg
Temperature range -30 °C ... +70 °C
Safety class IP 65, condensation-protected

Options

   
/Senskon Plug converter as a plug & play solution in the Harting connector

Dimensional drawings

MNHμCON

MNHµCON dimensional drawing

Downloads

icon-pdf-blueProduct data sheet

icon-pdf-blueOperating Instructions

Accessories

teaser-home-electronics-measuring-amplifiers

Accessory

View product