LVDT sensor DGB
Pressure resistant cylinder displacement transducer with threaded connection for installation in the cylinder base using M18 x 1.5 thread for internal sensor. The displacement transducer with a Case diameter of 15mm is pressure resistant up to 300 bar as standard and has a coil unit completely encapsulated in the casing with a fully symmetrical coil design according to the LVDT full bridge circuit. This results in good linearity and high temperature stability with low temperature drift.
Special versions with modified dimensional specifications, adapted electrical data and in other pressure classes according to customer requirements are possible.
Special versions with modified dimensional specifications, adapted electrical data and in other pressure classes according to customer requirements are possible.
Important features
- Nominal stroke: 25 mm bis 400 mm
- Pressure resistance up to 300 bar
- Housing diameter: 15 mm
- Connection thread: M 18 x 1,5
- Carrier frequency: 5 kHz , optional: 10 kHz
- Operating temperature: -40 ... 80 °C (möglich bis 120 °C)
- Safety class: IP 65, optional IP67
Technical data
DGB 25 | DGB 50 | DGB 100 | DGB 150 | DGB 200 | DGB 250 | DGB 300 | DGB 400 | ||
Nominal stroke | mm | ±12,5 | ±25 | ±50 | ±75 | ±100 | ±125 | ±150 | ±200 |
Mechanical stroke | mm | 30 | 55 | 105 | 160 | 210 | 260 | 320 | 420 |
Dimension A | mm | 40 | 55 | 80 | 105 | 130 | 155 | 180 | 230 |
Installation length B | mm | 80 | 120 | 160 | 240 | 320 | 400 | 480 | 620 |
Sensor weight (approx.) | g | 450 | 500 | 550 | 650 | 800 | 900 | 1050 | 1250 |
Core weight (approx.) | g | 12 | 14 | 16 | 20 | 25 | 28 | 30 | 35 |
General properties
DGB 25 ... 400 | |||||||
Supply voltage | Veff | up to 5 | |||||
Carrier frequency* | kHz | 5 kHz, Option: 10 kHz | |||||
Static resolution | virtually infinite |
||||||
Recommended measuring amplifier | MBI 46.31 | ||||||
Linearity error* | ±0,5 % F.S.O Option: 0,25 % |
||||||
Temperature coefficient of zero | ±0,04 % / 10 K | ||||||
Temperature error of sensitivity | ±0,1 % / 10 K | ||||||
Allowable pressure | Working pressure: 300 bar, test pressure: 450 bar | ||||||
Operating temperature* | -40 °C ... +80 °C, option for wire interface: up to 120 °C | ||||||
Protection class according to DIN 40050 | IP 65 |
* Select option when ordering
Do you have further technical questions about the product?
We will be happy to help you determine the order code and provide you with further specific information for your required product.
Dimensional drawings / Connection types
DGB
1) Option hexagonal
Electrical connection
Teflon cable, 2.5 m
Plug connector
Mating connector supplied