Pressure resistant valve displacement transducer with special flange and external sensor housing. The displacement transducer is Pressure resistant up to 320bar as standard and has a coil unit completely encapsulated in the casing with fully symmetrical coil construction according to LVDT full bridge circuit. Special versions with modified flange and installation dimensions, with integrated or external electronics, as well as in other pressure classes according to customer requirements are possible.
Important features
Nominal stroke: 16mm (other options possible)
Installation length: 74 mm (other options possible)
Case diameter: 14mm (other options possible)
Output signal: 0...V / 4 ... 20 mA
Output signal PWM: <0.4 VDC to >4.6 VDC
Operating temperature: 0 °C bis +80 °C
Protection class (DIN 40050): IP 65
Technical data
DPF 16 KTB A/P
Nominal stroke
± 8 mm (total 16 mm)
Mechanical stroke (min.)
17 mm
Dimension A
For valve NG12: 12.5 For valve NG18: 24.5
Dimension B (length without cable)
74 ± 2 mm
Sensor weight (approx.)
approx. 80 g
Core rod weight (approx.)
approx. 4 g
Non-linearity (typ.)
± 2,0% of nominal stroke
Case material
stainless steel
Operating pressure
< 50 bar
Operating temperature
0°C bis +80°C
Protection class (DIN 40050)
IP 65
Connection
PTFE cable, 5-wires, 0,2m, open braids
Technical data - MBI 47.02
MBI 47.02
Dimensions
mm
83 x 30 (L x B)
Weight
g
ca. 15
Operating voltage UB
VDC
10 (15) - 30
Current consumption IB
mA
40
Output (for nominal stroke)
Version A: 4 mA bis 20 mA Version P: PWM (< 0,4 VDC bis >4,6 VDC)
Installation / technical information
