LVDT sensor DPL

Pressure resistant cylinder displacement transducer with hole flange for installation in the cylinder base with internal sensor and Core rod. The displacement transducer with a Case diameter of 12 mm is Pressure resistant up to 200 bar as standard and has a coil unit completely encapsulated in the casing with fully symmetrical coil construction according to LVDT full bridge circuit. This achieves good linearity and high temperature stability with low temperature drift. Versions are available for 5kHz and 10kHz Carrier frequency as well as for increased temperature.

Special versions with modified flange dimensions and integrated electronics according to customer specifications are possible.

		DPL 50 ... 400
Excitation voltage (eff.)		up to 5 V
Excitation frequency*		10 kHz, option: 5 kHz
Static resolution		virtually infinite
Recommended measuring amplifier		MBI 50.25
Linearity error*		±0,5 % F.S.O. Option: ±0,25 %
Temperature coefficient of zero		±0,04 % / 10 K
Temperature coefficient of span		±0,1 % / 10 K
Pressure resistance		operating pressure 200 bar, test pressure 250 bar
Operating temperature		-40 °C ... +80 °C, option: up to 120 °C
Protection class (DIN 40050)		IP 65

		DPL 50	DPL 100	DPL 150	DPL 200	DPL 250	DPL 300	DPL 400
Nominal stroke	mm	±25	±50	±75	±100	±125	±150	±200
Max. mechanical stroke	mm	55	105	160	210	260	320	420
Dimension A	mm	55	80	105	130	155	180	230
Mounting length B	mm	100	140	220	300	380	480	600
Transducer weight (approx.)	g	730	750	830	870	900	950	1000
Plunger weight (approx.)	g	14	16	20	25	28	30	35

LVDT sensor DPL

Important features

Technical data

Properties

Do you have further technical questions about the product?

Dimensional drawings / Connection variants

DPL

Radial wire interface

Radial connector interface

Axial connector interface

Downloads

Product data sheet

Installation / technical information

Product group overview

Accessories

Measuring amplifiers

Calibrators

Accessories