Rotary encoder MDG-P 36

Incremental encoder in robust industrial quality equipped with the most innovative Hall technology. High resolution of up to 16,384 I/U in a very compact design. High-precision measurements can be realised in the smallest installation space.

The series can be supplied with any number of pulses from 1 to 16,384 I/U and a zero pulse. The zero pulse can be freely set. The electronics deliver in HTL or TTL, with a frequency of up to 1 MHz, both ABN signals and inverted signals.
  • Robust standard industrial encoder
  • Up to 16,384 pulses per revolution
  • Freely settable zero pulse
  • High interference immunity
  • 4,75 ... 32VDC supply
  • Reverse polarity and short circuit protection
  • Output frequency up to 1 MHz

Technical data

 
MDG-P 36
MDG-P 36 J
Sensor type / measuring principle
incremental / magnetic
incremental / magnetic
Sensor element
Hall technology
Hall technology
Resolution / pulse frequency
HTL to 16384 I/U: max. 600 kHz
TTL to 16384 I/U: max. 1 MHz
HTL to 16384 I/U: max. 600 kHz
TTL to 16384 I/U: max. 1 MHz
Flange type
Servo flange
Servo flange
Flange material
Aluminium
Aluminium
Flange material back
Stainless steel
Stainless steel
Case diameter
Ø 36 mm
Ø 36 mm
Shaft material
Stainless steel
Stainless steel
Starting torque
~0,3 Ncm at 20°C
~0,3 Ncm at 20°C
Wavelength
L: 11,5 mm
L: 11,5 mm
Shaft diameter
6mm / 8 mm
10 mm
Max. Shaft load radial
80  N / 50 N
300 N
Max. Axial shaft load
80  N / 50 N
300 N
Bearing type
2 precision ball bearings
2 precision ball bearings
Max. Operating speed
12000 min'-1
12000 min'-1
Supply voltage
4,75 VDC to 32 VDC
4,75 VDC to 32 VDC
Own power consumption
typ. 80 mA
typ. 80 mA
Resolution / pulse frequency
HTL / TTL
HTL / TTL
Channels
ABN and inverted signals
ABN and inverted signals
Weight
approx. 130 g
approx. 130 g
Connection
Cable or connector
radial or axial
Cable or connector
radial or axial
Protection (DIN 40050)
Housing: IP67
Shaft input: IP65
Housing: IP67
Shaft input: IP65
Working temperature
-40 °C to +85 °C (connector)
-20 °C to +80 °C (cable)
-40 °C to +85 °C (connector)
-20 °C to +80 °C (cable)
Storage temperature
-40 °C to +85 °C (connector)
-30 °C to +80 °C (cable)
-40 °C to +85 °C (connector)
-30 °C to +80 °C (cable)
Including software for parameterisation / measurement

Connection / installation dimensions

Radial connector

MDG 36 J Stecker Radial

Axial plug connection

MDG 36 J Stecker Axial

Cable connection Radial

MDG 36 J Kabel Radial

Axial cable connection

MDG 36 J Kabel Axial

Pin assignment plug / cable

MDG36A Anschlussbelegung
MDG36A Anschlussbelegung Kabel

Downloads

icon-pdf-blueData sheet