The MNH eddy current sensors with a protection level of IP67 have proven themselves in situations with high temperature requirements (up to 230°C) and rapid dynamic motions. With a dynamic range of up to 10 kHz, they are especially well suited for monitoring shaft positions and vibration (condition monitoring).
Separate conversion electronics are required for operating the high-temperature proximity sensors. They can be installed at several meters distance, e.g. in an electrical cabinet.
The standard types of the MNH series are not for flush mounting and, in the case of objects with a surface of steel 42CrMo4, they cover a measuring range of up to 40 mm. Greater distances can also be achieved, also to other conductive surfaces, using the processor-controlled MNHµCON.
MNH 2
- Nominal stroke 0.3 to 2.3 mm
- compact stainless steel housing
- head diameter 8 mm
- Teflon coaxial cable open or Lemo plug
Optional:
- M12 or UNF housing
- Philips CON010 or AEG 110x compatible version
MNH 4
- Nominal stroke 0.5 to 4.5 mm
- M18 housing, stainless steel, head made of PEEK
- head diameter 14 mm
- Teflon coaxial cable open or Lemo plug
Optional:
- UNF housing
- Philips CON010 compatible version
MNH 8
- Nominal stroke 1 to 9 mm
- PEEK head Ø 40 mm, on slab 80 x 40 mm_
- mounting borings Ø 8.2 mm
- Teflon coaxial cable open or with Lemo plug
Optional:
- metallic protective tube
- Philips CON010 compatible version
MNH 10
- Nominal stroke 1 to 11 mm
- box-shaped PEEK housing, 80 x 46 x 40 mm3
- fastening with 2 x M8 threads
- Teflon coaxial cable open or with Lemo plug
Optional:
- metallic protective tube
- Philips CON010 compatible version