CF measuring amplifier MBI 46.32

Measuring amplifier for operation of inductive displacement sensors
  • Suitable for LVDT and LVIT
  • 1-channel- or 2- channel -version
  • Supply: ±15 V or +24 V
  • Output: 10 V or 4...20 mA
  • Adjustment of gain, electrical zero and phase by easy to reach trimming potentiometers
  • Pot for rough adjustment of gain

Important features

  • Supply: ±15 VDC oder 24VDC
  • Carrier frequency: 5 kHz / others optional
  • Output signal: ±10 V or 4...20mA
  • Design: Plastic casing, top-hat rail

Technical data

.
     
Linearity error   < 0.1 % FSO
carrier frequency   5 kHz ±5 % (sine); optional 1 ... 20 kHz
Dynamic bandwidth   500 Hz (3 dB); (max. 1/10 of carrier frequency)
Power supply voltage (primary)   approx. 2 Vrms at 5 kHz, sinusoidal; max. 12 mArms
Input resistance (secondary)   approx. 200 kΩ
Output signal   4 ... 20 mA, impedance < 500 Ω or ±10 VDC, ballast resistor > 10 kΩ
Interference and carrier residual voltage   < 5 mVeff
Temperature coefficient of the zero point   < 0.10 % / 10 K at 100 mV/V
< 0.15 % / 10 K at 20 mV/V
Temperature coefficient of amplification   < 0.05 % / 10 K at 100 mV/V
< 0.15 % / 10 K at 20 mV/V
Operating temperature   0 ... 60 °C
Storage temperature   -25 ... 85 °C
Electromagnetic compatibility   DIN EN 61326-1
Supply voltage    ±15 VDC stabilized (1-channel)
 +20 ... +36 VDC (1-/2-channel)
Power consumption   max. 2 W (per channel)
Electrical connection   19-pin terminal block
Dimensions without see-through cover
Dimensions with see-through cover
  approx. W 100 x H 75 x D 110 mm
approx. W 100 x H 75 x D 125 mm
Weight   ca. 0.35 kg (1-channel version)
approx. 0.45 kg (2-channel version)

Suitable sensors

   
Inductive differential transformers (LVDTs)
with 4-wire technology
Differential inductors (LVITs) and long-stroke sensors (eddy current design)
Inductive half bridges with 3-wire technology
Rated output
20 ... 600 mV/V
Input impedance
100 ... 1000 Ω

Overview of types and options

Product code Channel Casing Supply Output signal
MBI 46.32.11 1-channel Top-hat rail casing ±15 VDC ±10 V
MBI 46.32.12 1-channel Top-hat rail casing ±15 VDC 4 ... 20 mA
MBI 46.32.31 1-channel Top-hat rail casing +24 VDC ±10 V
MBI 46.32.32 1-channel Top-hat rail casing +24 VDC 4 ... 20 mA
MBI 46.32.41 2-channel Top-hat rail casing +24 VDC ±10 V
MBI 46.32.42 2-channel Top-hat rail casing +24 VDC 4 ... 20 mA
Options Add. version
Alternative carrier frequency in the range 1 ... 20 kHz /... kHz
Output signal 0 ... 10 V /0-10 V
Output signal 0 ... 20 mA /0-20 mA
“Coarse pot” for rough adjustment of gain /GP

Downloads

icon-pdf-blueProduct data sheet

icon-pdf-blueInstallation / Operating instructions

icon-pdf-blueElectronics overview

Accessories

connector strip

Accessory

View product